1. Whether the furniture frame structure is strong: Office furniture, especially small pieces of furniture, such as stools, chairs, etc., can be dragged on the cement floor when buying, quietly put a bit, if the sound is crisp, it is better to explain the quality ; If the sound shows a hoarse or crackling noise or a squeak sound, it shows that the mortise is not tight enough, and the screw is not tight enough. If it is such office furniture that the basic appearance is not good, the quality is difficult to be guaranteed, so it is recommended that we must select an office furniture manufacturer with production capacity to cooperate.

Second, whether the selection of furniture is qualified: the use of constant environment of office furniture, the appearance of the material is also useful materials, such as tables, chairs, cabinet legs require good load-bearing hard wood, while the interior can choose other s material. The bathroom cabinet should be made of moisture-proof board instead of the common fiberboard, because the fiberboard will expand when it encounters water and will affect the overall life of the cabinet.

3. The moisture content of the wood does not exceed 12%: the moisture content of the customized office furniture cannot exceed 12%. If the moisture content is too high, it will cause deformation and warping of the furniture. When consumers buy furniture, they usually go away empty-handed, so how to control the moisture content? You can use the method of hand contact to detect, touch the bottom of the furniture or the area where there is no paint on the inside, if Feeling moist, the moisture content of the furniture is very high, such furniture must not be selected. The second method is to spray some water on the furniture where the paint is not sprayed. If the bleeding is slow or not at all, it is stated that the moisture content of the furniture is relatively high, and such furniture cannot be selected.

4. The appearance of the paint should be lubricated: if you find that the paint on the furniture is uneven when you buy it, you must not choose it. Paint spraying is a relatively mature skill, but if a furniture company does not do even the most basic work, you can think And know what the workmanship is in other areas. When we select office furniture for customization, we also need to check the effect of the paint on the corners. Usually this is easy to show the phenomenon of scum and paint falling. Be sure to check carefully when selecting.